bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Cruiser RV


  • Is LED Fabric Light Kit # LC674283 Waterproof
  • I spoke to Lippert and they told me that the LED Fabric Light Kit # LC674283 has a waterproof rating of IP55 but they don't have a Lumens rating for it. The best they could offer was the CCT which is 6000K. I attached a picture that shows how well it illuminates under an awning though.
    view full answer...

  • Inlet Spacing for 14-7/8" Long x 12-3/8" Wide Single Bowl RV Bathroom Sink
  • The inlet spacing for the Single Bowl RV Bathroom Sink # 37295351 you're looking at is 4" center to center. I've attached a photo demonstrating this as well as a review video with other specs you can check out. If you're also needing to replace the faucet I recommend checking out the Phoenix Faucets Catalina RV Bathroom Faucet w/ D-Spud # PF222241 which I'm attaching a review for as well.
    view full answer...

  • Can Aluminum Trailer Wheel Handle 65 PSI of the AM10235 load range D
  • Yes your current aluminum wheels and valve stems will easily be able to handle the higher psi rating of the trailer tire part # AM10235 that you referenced. What's also great about this Kenda Karrier trailer tire is that it has load rating of D, an 81 mph speed rating, and a 5-year warranty.
    view full answer...

  • Can I Use the Hollywood Racks RV Rider in a Class II 2 Hitch?
  • No, it will not but I have one that will. The Hollywood Racks RV Rider Bike Rack item # HLY64FR is only rated for class III 2" hitches that have a minimum 350 lbs tongue weight capacity. Physically it will fit but you shouldn't do it plus you'll void the warranty and lose any liability coverage. Instead, I recommend using the Thule EasyFold XT item # TH903202. The EasyFold has a similar frame mount design. It has a 65 lbs per bike capacity and fits all class I, II, and III receivers no...
    view full answer...

  • Will Lippert Power Stance Trailer Jack Fit On A-Frame Trailer With Limited Clearance?
  • It sure will! I had our warehouse measure the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR you were looking at and from the back of the jack tube to the back of the head of the jack is 1-1/2" as shown in the included diagram. I included a video of the # LC69VR for you to take a look at.
    view full answer...